What Kind Of Nails Needed For Outside Corner Pvc Molding

Fine Homebuilding Project Guides

Painting

How to Fill up Blast Holes and Pigment PVC Trim

Despite what manufacturers say, sometimes you do need to finish this durable outside trim

Recollect when you knew exactly what to pick upwards at the lumber yard for outside trim? It's been a while now since the obvious pick was the about rot-resistant solid woods available in your area. Manufactured trim made from wood, plastic, composites, and cement, is now widely available. These engineered options hope not only to be durable materials, but to take and agree finishes with less maintenance. PVC trim is a pop choice. And for carpenters comfortable working with wood, the switch to PCV is manageable.

There are nevertheless some things to know nearly working with PVC. One common question builders inquire is, "Does PVC trim demand to be painted?" Manufacturers say information technology doesn't, however they practice recommend hiding or finishing cut edges, which volition be more than porous than the factory surface. Withal, this advice doesn't necessarily reflect the experience of builders and painter who accept worked with PVC.

Pro painter Jim Lacey says PVC is a breeding footing for mildew growth. "Just last twelvemonth my company completed a very large PVC trim chore in which all the trim required washing and removing mildew fifty-fifty though the trim was installed only months prior," wrote Lacey, "It is possible that this effect is indigenous to the New England region, withal I take no evidence to support this." He too notes that some people want the durability of PVC, only would adopt a color other than white. Given Jim's experience, we asked him to show us how he fills nail holes and paints PVC trim for a long lasting terminate.

Jim's tips for filling boom holes in PVC:

-Use a 2-part epoxy nail-hole filler made for PVC.

-Using your hands, blend the two dissimilar epoxy components until the colour is evenly mixed.

-Only mix as much epoxy as you lot tin can utilise in fifteen minutes.

-Applcation: For small holes utilise your finger. For larger holes use a 1-inch putty pocketknife.

-Completely fill the nail holes, leaving them slightly crowned to sand subsequently the epoxy sets. Or, work it every bit smoothen as possible by shaving it off with a putty pocketknife or working it in with your fingertips.

-For sanding, use 100 to 120 grit sandpaper with light pressure.

-Use a dry rag to clean away any dust.

Jim's tips for painting PVC:

-E'er paint PVC for mildew and clay resistance.

-Don't use a primer.

-Use a 100% Acrylic paint.

-Spot prime number large boom holes with the Acrylic paint.

More on PVC Trim

How to Install PVC Trim – See the unique methods that are needed to install this trim work material.

New Trim Fit for an Old House – A traditional porch projection offers lessons in style, proportions, and seamless transitions.

PVC Roof Trim – A coastal builder'due south technique for durable and weathertight fascias and soffits is based on years of experience with plastic trim.

Picket more than Building Skills videos.

Previous: Prime Cedar Siding to Stop Bleeding Tannins and H2o Stains Next: Paint Problems and How to Foreclose Them